CHEMOTRONIC III
41
One can create a new test program by the following procedure:
1.
Depress the "select" button until "Ed(it)" is displayed and choose the
number of
the program by means of the up/down buttons.
2.
Depress the "enter" button in order to get access to the individual
parameters of this program number.
3.
Enter the desired value for the
hold time
.
4.
Enter the desired speed values
N1/N2/N3
.
5.
Enter the desired top temperature
T1
and
T3
for the speed control.
6.
Enter the desired level of
turbidity
.
7.
Enter the desired program
calibration
Ac = automatic calib factor
Pc = program calib cal P1/P2
Ec = external calibration (global values)
8.
Confirm these parameters by pressing the
green button
(start button).
Summary of Contents for HEMOTRONIC III
Page 54: ...CHEMOTRONIC III 54 Appendix...
