12
User Guide
CairMax Duo
Operation
Mode
ALTERNATE
In Alternating Mode, alternate mattress air cells
inflate and deflate following a fixed cycle time of 12
minutes.
STATIC
In Static Mode, all air cells cells remain fully inflated
to maximum selected pressure setting. This mode
should be used to create a firm base for stable
patient handling and transport or other special
circumstances.
The system will automatically start in Static
Mode, and revert to Alternating Mode once
optimal pressure is reached.
The system will operate in Static Mode for a
maximum of
20 minutes, after which it will automatically
revert to
Alternating Mode for patient safety.
Transport Mode
The mattress should be transported in Static Use,
without control unit.
Before moving the mattress, ensure the control unit
switched off and disconnected from mains power.
Disconnect the umbilical air hoses from the control
unit by unplugging the quick release connectors, wait
for all air cells to deflate to remove excess pressure.
Run the umbilical air hoses through the left-side
cord retention loops and clip the male and female
connectors around a loop to secure in place.
The air cells will not alternate when
disconnected from the control unit. Repeat
Alternating Use set up instructions (page 9)
to active dynamic function after mattress is
moved.
Storage
Disconnect the mattress from control unit when
not in use
and store separately.
The mattress should be stored laying flat in a cool
and dry area after cleaning. Avoid laying the mattress
upside down, or on the side or end. Avoid stacking
mattresses or placing heavy objects on top of the the
mattress when not in use.
It is recommended the control unit and power cord be
returned to its carton when not in use.