Novexx Solutions ALS 30 Series, Installation Manual

Page: 10 / 59

Installation Manual
ALS 30x
02/2016 | 00 10 Please observe the following
SAFETY INSTRUCTIONS
Information and qualifications
Ensure necessary qualifications
 Only allow appropriately qualified personnel to set up, adjust, and repair the labeler, e.g. me-
chanical and electronics specialists.
 Only allow work on the electronics system to be done by authorised electronics technicians.
 Clearly define the responsibilities for installing, setting up, adjusting, and repairing the labeler.
Consistently adhere to the responsibilities.
Qualification for system integrators and service technicians („service personnel“)
Knowledge required to install the print dispenser and perform service work must be
demonstrated through appropriate qualification. Only service personnel with technical trai-
ning are able to assess the tasks to be performed and recognise potential dangers.
– Knowledge acquired through technical training in mechanics and electronics (for example in
Germany the training to become a mechatronics engineer).
– Participation in a technical training course for the corresponding labeler offered by the manufac-
turer.
– The service personnel must be acquainted with the functionality of the labeler.
– The system integrator must be acquainted with the functionality of the of the system into which
the labeler is being integrated.
1) For example faults when detecting labels
2) For example incorrect labelling
Tasks System integrator Operator Service technician
Install the machine X
Connect X
Make settings X
Switch on/off X X X
Insert/change material/ribbon X X X
Application-related settings X X X
Rectify minor operating faults
1
X X X
Clean the machine X X
Rectify major operating faults
2
X
Settings to the electronics/ mechanics X
Repairs X
Manual: Service manual Operating Manual Service manual, spare
parts catalogue
[tab. 1]An example of the distribution of tasks among different qualified personnel