Novexx Solutions ALS 30 Series, Installation Manual

Page: 51 / 59

Installation Manual
ALS 30x
02/2016 | 00 51 Installation and Deinstallation
Function test
Prerequisite:
– Machine is in dispensing mode.
–
MACHINE SETUP > OD sensor warn.
= „Warning“ (set-
tings according to“Enabling” auf Seite 49).
If the light beam of the sensor [85C] meets the reflector,
the following warning appears after the next label has
been dispensed:
The message disappears immediately, if the light beam
stops falling on the reflector.
If the OD sensor is connected to the applicator inter-
face :
– No status message will be displayed on the opera-
tion panel in case of low material (only the „OD sen-
sor“ signal will be activated)
– If no sensor is connected, the output signal
„OD sensor“ remains activated
ONLINE
OD sensor warn.