Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT, Deployment Manual, Page: 86 / 322

Save the file and run
telinit q
to pass the changes in
/etc/inittab
to init. The
vt220 terminal should then be ready to use. If not, try hitting Enter at the terminal until
the login prompt appears.
Make sure that you do not apply the changes as described above to a system that does
not support vt220 terminal emulators. Otherwise, login might become impossible on
this system and you will be shown the following message:
INIT respawning too fast, disabled for 5 minutes.
To redirect the kernel messages at boot time from the system console to the vt220 ter-
minal, add the following entries to the
parameters
line in
/etc/zipl.conf
:
console=ttyS0 console=ttyS1
The resulting
parameters
line would look like the following example:
parameters = "root=/dev/dasda2 TERM=dumb console=ttyS0 console=ttyS1"
Save the changes in
/etc/zipl.conf
, run
zipl
, and reboot the system.
4.6 Further In-Depth Information
about IBM System z
IBM has published a number of very interesting documents about their System z plat-
form. Find them either on the Internet (
http://www.redbooks.ibm.com
) or in
your installed system (package
redbook
) under
/usr/share/doc/packages/
redbook
.
4.6.1 IBM System z with SUSE Linux
Enterprise Server
Find additional in-depth technical documentation about the kernel and application topics
on IBM System z with SUSE Linux Enterprise Server at the following location:
• http://www.ibm.com/developerworks/linux/linux390/
documentation_novell_suse.html
74 Deployment Guide