Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT, Deployment Manual

Page: 124 / 322

FC00
is an example address of the ZFCP adapter, replace this value with the correct
address.
6.13.2 IBM System z: Connecting to the
Installed System
After IPLing the installed system, establish a connection with it to complete the instal-
lation. The steps involved in this vary depending on the type of connection used at the
outset.
Using VNC to Connect
A message in the 3270 terminal asks you to connect to the Linux system using a VNC
client. This message is easily missed, however, because it is mixed with kernel messages
and the terminal process might quit before you become aware of the message. If nothing
happens for five minutes, try to initiate a connection to the Linux system using a VNC
viewer.
If you connect using a Java-capable browser, enter the complete URL, consisting of
the IP address of the installed system along with the port number, in the following
fashion:
http://<IP of installed system>:5801/
Using X to Connect
When IPLing the installed system, make sure that the X server used for the first phase
of the installation is up and still available before booting from the dasd. YaST opens
on this X server to finish the installation. Complications may arise if the system is
booted up but unable to connect to the X server in a timely fashion.
Using SSH to Connect
IMPORTANT: IBM System z: Connecting from a Linux or UNIX System
Start SSH in an xterm. Other terminal emulators lack complete support for the
text-based interface of YaST.
112 Deployment Guide