Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT, Deployment Manual

Page: 119 / 322

6.12.2 Booting (Expert)
►zseries: This module cannot be used to configure the boot loader (zipl) on the IBM
System z platforms. ◄
YaST proposes a boot configuration for your system. Other operating systems found
on your computer, such as Microsoft Windows or other Linux installations, will auto-
matically be detected and added to the boot loader. However, SUSE Linux Enterprise
Server will be booted by default. Normally, you can leave these settings unchanged. If
you need a custom setup, modify the proposal for your system. For information, see
Section “Configuring the Boot Loader with YaST” (Chapter 8, The Boot Loader GRUB,
↑Administration Guide).
6.12.3 Software (Overview)
SUSE Linux Enterprise Server contains a number of software patterns for various ap-
plication purposes. Click Software to start the pattern selection and modify the installa-
tion scope according to your needs. Select your pattern from the list and see a pattern
description in the right part of the window. Each pattern contains a number of software
packages needed for specific functions (Web and LAMP server or a print server). For
a more detailed selection based on software packages to install, select Details to switch
to the YaST Software Manager.
You can also install additional software packages or remove software packages from
your system at any later time with the YaST Software Manager. For more information,
refer to
Chapter 9, Installing or Removing Software (page 141).
Installation with YaST 107