Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT, Deployment Manual, Page: 115 / 322

configured. If the add-on product is available on removable media, the system automat-
ically mounts the media and reads it's contents. If the add-on product is available on
hard disk, choose Hard Disk to install from an unmounted hard drive, or Local Direc-
tory/Local ISO Image if it is located in the file system. Add-on products may be delivered
as a repository or as a set of rpm files. In the latter case, check Plain RPM Directory.
While a network is available, you can chooses from additional remote sources such as
HTTP, SLP, FTP and others. It is also possible to specify a URL directly.
Check Download Repository Description Files to download the files describing the
repository now. If unchecked, they will be downloaded once the installation starts.
Proceed with Next and insert a CD or DVD if required. Depending on the product's
content it may be necessary to accept additional license agreements.
It is also possible to configure add-on products at any time in the installed systems.
Using add-on products in the installed system is described in
Chapter 10, Installing
Add-On Products (page 157).
Network Setup
When invoking the network setup, YaST scans for available network cards. If more
than one network card is found, you have to choose the card to configure from the list.
If an ethernet network adapter is not already connected, a warning will open. Make
sure the network cable is plugged in and choose Yes, Use It. If your network is equipped
with a DHCP server, choose Automatic Address Setup (via DHCP). To manually set
up the network choose Static Address Setup and specify IP Address, Netmask, Default
Gateway IP, and the DNS Server IP.
Some networks require the use of a proxy server to access the Internet. Tick the check
box Use Proxy for Accessing the Internet and enter the appropriate specifications. Click
Accept to perform the network setup. The installation procedure will continue with the
add-on products or repositories setup as described in
Section 6.9.1, “Add-On Products”
(page 102).
6.10 Clock and Time Zone
In this dialog, select your region and time zone. Both are preselected according to the
selected installation language. To change the preselected values, either use the map or
Installation with YaST 103