Novell LINUX ENTERPRISE SERVER 11 - DEPLOYMENT, Deployment Manual, Page: 81 / 322

Autoinstallation. For more information about AutoYaST, refer to Chapter 21,
Automated Installation (page 285).
4.4.2 Configuring the Network Interface
IMPORTANT: Configuring the Network Interface
All settings discussed here only apply to the network interface used during in-
stallation. Configure additional network interfaces in the installed system by
following the instructions given in Section “Configuring a Network Connection
Manually” (Chapter 17, Basic Networking, ↑Administration Guide).
Hostname=zseries.example.com
Enter the fully qualified hostname.
Domain=example.com
Domain search path for DNS. Allows you to use short host names instead of fully
qualified ones.
HostIP=192.168.1.2
Enter the IP address of the interface to configure.
Gateway=192.168.1.3
Specify the gateway to use.
Nameserver=192.168.1.4
Specify the DNS server in charge.
InstNetDev=osa
Enter the type of interface to configure. Possible values are
osa
,
hsi
.
ctc
,
escon
,
and
iucv
. (CTC, ESCON, and IUCV are no longer officially supported).
For the interfaces of type
hsi
and
osa
, specify an appropriate netmask and an
optional broadcast address:
Netmask=255.255.255.0
Broadcast=192.168.255.255
For the interfaces of type
ctc
,
escon
, and
iucv
(CTC, ESCON, and IUCV are
no longer officially supported), enter the IP address of the peer:
Installation on IBM System z 69