Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Installation Manual

Page: 663 / 982

Figure 34.9 DHCP Server: TSIG Configuration
Dynamic DNS: Interface Configuration
You can now activate dynamic DNS for the subnet by selecting Enable Dynamic
DNS for This Subnet. After doing so, use the drop-down list to choose the TSIG
keys for forward and reverse zones, making sure that keys are the same for the
DNS and the DHCP server. With Update Global Dynamic DNS Settings, enable
the automatic update and adjustment of the global DHCP server settings according
to the dynamic DNS environment. Finally, define which forward and reverse zones
should be updated per dynamic DNS, specifying the name of the primary name
server for each of the two zones. If the name server runs on the same host as the
DHCP server, you can leave these fields blank. Selecting Ok returns to the subnet
configuration dialog (see
Figure 34.8, “DHCP Server: Configuring Subnets”
(page 644)). Selecting Ok again returns to the original expert configuration dialog.
DHCP 645