Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Installation Manual

Page: 106 / 982

default linux
# default label linux
kernel linux append initrd=initrd ramdisk_size=65536 insmod=e100 \
install=http://192.168.0.22/install/suse-enterprise/
The same example for autoinstallation looks like this:
default linux
# default label linux
kernel linux append initrd=initrd ramdisk_size=65536 insmod=e100 \
install=http://192.168.0.22/install/suse-enterprise/ \
autoyast=nfs://192.168.0.23/profiles/autoinst.xml
Replace the example IP addresses and paths with the data used in your setup.
Preparing to Boot from CD-ROM
There are several ways in which booting from CD-ROM can come into play in Auto-
YaST installations. Choose from the following scenarios:
Boot from SUSE Linux Enterprise Media, Get the Profile over the Network
Use this approach if a totally network-based scenario is not possible (for example,
if your hardware does not support PXE) and you have physical access to system
to install during most of the process.
You need:
• The SUSE Linux Enterprise media
• A network server providing the profile data (see Section 5.1.2, “Distributing the
Profile and Determining the autoyast Parameter” (page 84) for details)
• A floppy containing the
info
file that tells the installation routines where to find
the profile
or
88 Installation and Administration