Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Installation Manual

Page: 165 / 982

In this dialog, there is also a shortcut to the joystick configuration. Click Joystick
configuration and select the joystick type in the following dialog to configure a
joystick. Click Next to continue.
3 In Sound Card Volume, test your sound configuration and make adjustments to
the volume. You should start at about ten percent to avoid damage to your hearing
or the speakers. A test sound should be audible when you click Test. If you cannot
hear anything, increase the volume. Press Next > Finish to complete the sound
configuration.
To change the configuration of a sound card, go to the Sound Configuration dialog,
select a displayed Card Model, and click Edit. Use Delete to remove a sound card
completely.
Click Other to customize one of the following options manually:
Volume
Use this dialog for setting the volume.
Start Sequencer
For playback of MIDI files, check this option.
Set as Primary Card
Click Set as Primary Card to adjust the sequence of your sound cards. The sound
device with index 0 is the default device used by the system and the applications.
The volume and configuration of all sound cards installed are saved when you click
Finish in the YaST sound module. The mixer settings are saved to the file
/etc/
asound.conf
and the ALSA configuration data is appended to the end of the files
/etc/modprobe.d/sound
and
/etc/sysconfig/hardware
.
8.5 System
This group of modules is designed to help you manage your system. All modules in
this group are system-related and serve as valuable tools for ensuring that your system
runs properly and your data is managed efficiently.
System Configuration with YaST 147