Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION 11-05-2007, Installation Manual

Page: 291 / 982

Description Command
At least one node in the cluster must be active for the
cluster to be online.
Offlines the cluster named ocfs2 /etc/init.d/o2cb offline
ocfs2
Unloads the O2CB modules and in-memory file systems /etc/init.d/o2cb unload
If the cluster is set up to load on boot, starts the cluster
named ocfs2 by loading
o2cb
and onlining the cluster
/etc/init.d/o2cb start
ocfs2
At least one node in the cluster must be active for the
cluster to be online.
If the cluster is set up to load on boot, stops the cluster
named ocfs2 by offlining the cluster and unloading the
O2CB modules and in-memory file systems /etc/init.d/o2cb stop
ocfs2
13.1.6 OCFS2 Packages
The OCFS2 kernel module (
ocfs2
) is installed automatically in SUSE Linux Enterprise
Server 10 and later. To use OCFS2, use YaST (or the command line if you prefer) to
install the
ocfs2-tools
and
ocfs2console
packages on each node in the cluster.
1
Log in as the
root
user or equivalent, then open the YaST Control Center.
2 Select Software > Software Management.
3
In the Search field, enter
ocfs2
The software packages
ocfs2-tools
and
ocfs2console
should be listed
in the right panel. If they are selected, the packages are already installed.
Oracle Cluster File System 2 273