Novatel MiFi 6620L User Manual Download Page 81

Page: 81 / 131

Firewall

The Jetpack firewall determines which Internet traffic is allowed. The Firewall menu contains the
following sections:

•

VPN Passthrough — Turns ON/OFF the VPN feature and allows or disallows connected

devices to establish a VPN tunnel.

•

If ON, this feature allows VPN clients to connect through the Jetpack to remote VPN
Servers. Normally, this option should be turned on.

•

If OFF, VPN clients are not allowed to connect.

•

IPv6 Transparent Mode — Allows connected devices to be accessible from the Internet.

•

DMZ (IPv4) — Allows the connected device specified as the DMZ IP address to receive all

traffic which would otherwise be blocked by the firewall.

•

DMZ (checkbox) — Use the checkbox to turn ON/OFF the DMZ feature.

•

DMZ IP Address — Enter the IP address of the connected device you wish to become the
DMZ device.

•

Save Changes — Use to activate and save new settings.

Jetpack Settings Advanced - Firewall

Summary of Contents for MiFi 6620L




































































































































Search results

Summary of Contents for MiFi 6620L

Reviews:

Related manuals for MiFi 6620L

Brands by name

Popular brands

Novatel MiFi 6620L, User Manual

Search results

Summary of Contents for MiFi 6620L

Reviews:

Related manuals for MiFi 6620L

Brands by name

Popular brands