Novatel MiFi 6620L User Manual Download Page 20

Page: 20 / 131

To install a new 4G LTE SIM card:

➊

Remove the battery cover located on the underside of the Jetpack.

➋

If necessary, remove the SIM card from the outer card, being careful not to touch the gold-
colored contacts.

➌

Hold the card with the gold-colored contact points facing down.

➍

Insert the SIM card into the slot. The SIM card MUST remain in the SIM card slot when in use.

CAUTION!

Do not bend or scratch your SIM card. Avoid exposing your SIM card to static

electricity, water, or dirt.

Universal Charging

The universal charging port allows you to charge an additional device using your Jetpack.

To charge an additional device:

➊

Slide the port shield to expose the USB universal charging port.

➋

Connect the USB cable to the device to be charged.

➌

Connect the other end of the USB cable to the Universal Charging port on the Jetpack.

Summary of Contents for MiFi 6620L




































































































































Search results

Summary of Contents for MiFi 6620L

Reviews:

Brands by name

Popular brands

Novatel MiFi 6620L, User Manual

Search results

Summary of Contents for MiFi 6620L

Reviews:

Brands by name

Popular brands