Novatel MiFi 2352 User Manual Download Page 75

Page: 75 / 99

File Sharing

The File Sharing page allows you to provide access to files on your microSDHC card to others on
your MiFi network.

Opening the Page

➊

➤

Choose

System > File Sharing

from the menu bar.

The File Sharing page will open.

File Sharing Page

This page has two sections.

Enable microSD File Sharing

This section enables you to allow others on your network to access files on your microSDHC cards.

➊

Select the

Enable microSD File Sharing

checkbox to allow file sharing.

➊

➋

From the “Files to share” list, choose whether to share the Entire SD Card or a Specified Top-
level Folder.

➊

➌

If you choose the Specified Top-level Folder option, enter the folder path in the box.

➊

➍

From the Access Type list, choose whether others should have Read only or Read and Write
access to the files.

➊

➎

Click

Apply

Summary of Contents for MiFi 2352




































































































Search results

Summary of Contents for MiFi 2352

Reviews:

Related manuals for MiFi 2352

Brands by name

Popular brands

Novatel MiFi 2352, User Manual

Search results

Summary of Contents for MiFi 2352

Reviews:

Related manuals for MiFi 2352

Brands by name

Popular brands