Novatel MiFi 2352 User Manual Download Page 27

Page: 27 / 99

Using MiFi in USB Mode

In USB mode, you connect your MiFi to your computer with the microUSB cable and use it as a USB
modem. The microUSB cable will power MiFi (and slowly charge its battery) while it is plugged in.

Windows:

➊

Use the microUSB cable to plug MiFi into a USB 2.0 port on your computer. MiFi will turn on
automatically.

NOTE

Only the connection LED on the power button will light.

WiFi is disabled in USB mode.

➊

➋

Make sure the MobiLink software is running. The system tray icon will appear in the Windows
notification area.

NOTE

If the system tray icon is not present, double-click the MobiLink 3 desktop shortcut to launch the

software.

➊

➌

Right-click the system tray icon and select

Connect

– Or –

➊

➌

To see network and connection status also, right-click the system tray icon and select

Open

Connection Manager

➊

➍

Click

Connect

When

Ready

changes to

Connected

, you have successfully connected to the network.

Summary of Contents for MiFi 2352




































































































Search results

Summary of Contents for MiFi 2352

Reviews:

Related manuals for MiFi 2352

Brands by name

Popular brands

Novatel MiFi 2352, User Manual

Search results

Summary of Contents for MiFi 2352

Reviews:

Related manuals for MiFi 2352

Brands by name

Popular brands