8
➊
➌
Click
Connect
.
If your unit was not pre-configured, the WiFi LED will flash to show connected status.
Continue with “Configure MiFi for your service provider.”
➊
➍
Enter the WEP key when requested.
The WiFi LED will flash to show connected status.
Since your network was pre-configured, you do not need to continue with the following
sections. If you want to change the settings of your MiFi (such as security type), follow the
instructions for using the browser interface. [See
Interface Basics
(page 30).
]
Configure MiFi for your service provider:
IMPORTANT
If your network was not pre-configured, follow these steps to configure MiFi
for you network operator. Your network service provider should have given you instructions
with your APN (and user name and password, if required). Be sure you have and follow those
instructions.
➊
➊
From your computer’s Web browser, enter
http://www.mifi
(or
http://192.168.1.1)
into the
address bar and press the
Enter
or
Return
key.
MiFi’s Home page will open. This is the login page to the browser interface and also provides
access to your microSDHC card.
Windows only: You can click
Add to Favorites
to bookmark the page in your browser for easier
access.
➊
➋
Enter “admin” into the Login window in the upper right corner of the window and click
Login
.
The Home page for the browser interface will open.
