Novatel HS 3001, Integration Manual

Page: 7 / 70

- vi -
Regulatory Compliance
FCC CERTIFICATION
Novatel Wireless M2M certifies that the Enabler HS 3001 CDMA Radio Module (FCC ID:
MIVCNN0301) complies with the RF requirements applicable to broadband PCS equipment
operating under the authority of 47 CFR Part 24, Subpart E and Part 22 Subpart H of the FCC
Rules and Regulations. This certification is contingent upon installation, operation and use of
the Enabler HS 3001 module and its host product in accordance with all instructions provided
to both the OEM and end user. When installed and operated in a manner consistent with the
instructions provided, the Enabler HS 3001 module meets the maximum permissible exposure
(MPE) limits for general population / uncontrolled exposure as defined in Section 1.1310 of the
FCC Rules and Regulations.
The Enabler HS 3001 module is designed for use in a variety of host units, "enabling" the host
platform to perform wireless data communications. However, there are certain criteria relative
to integrating the modem into a host platform such as a PC, laptop, handheld, monitor and
control unit, etc. that must be considered to ensure continued compliance with FCC
compliance requirements.
Important Information for Canada/USA OEM Integrators
This section provides guidance for using the Enabler HS 3001 in host devices through the FCC
Permissive Change process. When utilizing the permissive change process, Novatel Wireless,
the grantee, is responsible for all integrations and must be consulted on all regulatory matters
involving the Enabler HS 3001.
The Enabler HS 3001 module is granted with FCC/IC modular approval for mobile
1
applications, and may be installed as a standalone
2
transmitter in final products meeting the
following conditions. If the following conditions are followed, it may be used in final products
without additional FCC/IC certification. Otherwise, additional FCC/IC approvals must be
obtained.
1
Mobile Device Definition – FCC defines as a transmitting antenna located at a distance
≥
20cm from the user.
2
Standalone is defined as a single transmitter transmitting as opposed to 2 or more
transmitters transmitting simultaneously.