Novatech Bitronics M87X Series, Manual

Page: 8 / 184

ML0021 August 15, 2018
vii
Copyright 2018 Bitronics, LLC
FIRMWARE VERSION
The following table provides the most recent firmware and software versions. For best
results, the Configurator version used should match with the firmware version. A complete
list of firmware and software versions is provided on the 70 Series Utilities CD.
NOTE: Host firmware versions 3.0x require 70 Series IEDs with 64 MB SDRAM. Do not
attempt to upgrade older 70 Series IEDs with insufficient memory to v3.0x
.
Firmware Versions
Description
Bios
Version
DSP
Firmware
Host
Firmware Configurator
Utilities
CD
Release
Date
M87x Product Release,
New Hardware supported
Dual Bus, Analog I/O
2.1/3.0* 1.21 2.05 2.31 2.43 03/24/06
M87x Product Release, Fault
Location, Adjustable Sample
Rate 3.40
1.30 2.17 2.43 2.56 12/21/07
M87x Product Release; Add
Demand per phase for Watts
,VAr, & VA. Configurator &
Biview improvements w/
modems. Change to Digital I/O
default watchdog contact
(Configurator setup).
Support new version of hardware
on P3x, P4x modules.
3.40 1.30 2.18 3.00A 2.57 10/17/08
M87x Product Release: Added
1mHz accuracy on M87x.
Improved poll rate to 100ms for a
single P40 transducer inputs
module. Fault distance
configuration is changed. Time
sync with respect to DNP master
is changed from the DNP master
jamming the time to asking the
master what time to jam.
Increased waveform recording
limit from 999 post trigger for
longer recording.
3.40 1.31 2.19 3.02 2.58 09/30/2009
Mx7x Product Release,
IEC61850 & SNTP; Avg 3-Ph
Amps and Avg 3-Ph Volts
3.40 1.30 3.01.0 3.01 3.01 1/30/2009