Novatech Bitronics M87X Series, Manual

Page: 136 / 184

ML0021 August 15, 2018
120
Copyright 2018 Bitronics, LLC
Input / Output Capacitance, any Terminal to Case: 1400pF
Power Supply Requirements:
3.3Vdc, 5Vdc, +/-12Vdc (supplied from backplane)
Hot Swap:
P30A, P31 complies with Hot Swap specification PICMG 2.1
R1.0 for Basic Hot Swap (requires Host Processor re-boot)
9.4 Environmental
Operating Temperature: -40C to 70C
Relative Humidity:
0-95% non-condensing
Installation Category: IC III (Distribution Level), Pollution Degree 2. Refer to definition
on page 9.
9.5 Physical
Connections:
Removable Terminal Blocks, accepts #16-28AWG (1,4-
0,09mm) wire. Recommended Torque Rating is 2.2 In-Lbs,
0.25 N-m. Standard 0.150" (3,81mm) header socket accepts
other standard terminal types. Solid core wire is
recommended, or stranded wire with the use of “bootlace
ferrules,” where these are available.
Package:
P30A: CompactPCI TM (3U, 4HP) removable module
P31: CompactPCI TM (3U, 8HP) removable module
P33: CompactPCI
TM
(3U, 4HP) removable module
9.6 Hot Swap (HS) Compatibility
The blue Hot Swap LED located on the front panel is illuminated to indicate when it is
permissible to extract a board in systems that support the
Full Hot Swap System Model.
The M87x currently supports the Basic Hot Swap System Model. The Basic Hot Swap
System Model does not illuminate the blue LED. The blue LED will turn on briefly when a
card is inserted into an energized device or when the device is reset. If the blue LED
remains illuminated after insertion into an M87x or remains illuminated after the Host
module has booted, the associated card is malfunctioning.
9.7 Description
9.7.1 P30A
The Digital I/O Module consists of two circuit boards, the CompactPCI
TM Interface Board
(692), and the I/O Board (693). The Interface Board contains the CompactPCI TM
backplane connector and interface circuitry, front panel LEDs, and jumper blocks for output
relay power-up configuration.