www.novasina.ch
34
35
ENGLISH
ENGLISH
•
A „Scanner Test“ message is displayed:
Before proceeding with this test, make sure you pushed the green button on the
scanner to switch it on. A beep confirms it acoustically. Then press „OK“ button
•
Two barcodes are displayed. Scan one after the other with the wireless
barcode scanner. Maybe you have to try several times with different
angles as reflections by the touch screen can disturb. If you managed to
scan the first barcode successfully, it disappears.
•
Once both barcodes are scanned successfully, the Data logger submenu
is displayed again. Installation is completed at that point and wireless
barcode scanner can be used
9. Audit Trail
The LabMaster-aw neo is equipped with a fully 21CFR11 compliant audit trail. All
manipulations by users, system events, technical incidents, etc. are logged and
can neither be deleted nor changed by a user, even if the user has full permissi-
on rights on the instrument. The entire history of the instrument can be analyzed
and also be exported to SD-card.
The records of the current day are displayed in the audit trail area on the measu
-
rement screen. By pushing on that area of the screen, a new „audit trail analysis“
window is opened where all entries can be viewed.
The internal memory capacity for the audit trail is limited to 365 days of instru
-
ment operation. After that period of time, the oldest entries will be deleted. To
avoid a loss of important and usefull data, it is strongly recommended to export
the audit trail from internal memory to the SD-card daily. Make sure as well that
data on the SD-card are backed-up regularly.
To export the internal audit trail data to SD-card, go to „System settings“ ->
„Maintenance“ -> „Audit trail (Export)“. Export is carried-out into the main direc-
tory of the SD-card. The file is named like „serialnumber.atr“.