www.novasina.ch
10
ENGLISH
3.1.5 Warning or Information Symbols
Once there is an issue which needs special attention, an information is displayed
in the chamber area, replacing the display of the current measurement values.
Symbol
Description
Note
An error with the current
measurement chamber
has been noticed
Press icon the get more details
Sensor will be brought to
operation temperature
Press icon the get more details. However,
a measurement can be started but data
will only be displayed, if this symbol has
disappeared
Due to an on-going inci-
dent, measurement values
cannot be gathered
Example: dew protection
is activated
Press icon the get more details
Due to a warm sample or
warm SAL-T, there is a risk
of condensation of water
on the sensor
Remove sample/standard from measure
-
ment chamber as soon as possible.
Let it cool down outside of the chamber.
Do not forget to cover sample cup or
SAL-T to avoid humidity exchange with air
humidity from ambient air
3.1.6 Status Bar
The following information is displayed alternating:
Text / Symbol
Description
Note
User: ..., Time: ...
Current date and time
Press icon (cham-
ber section) for
more information
Press on the displayed
icon in chamber area to
get additional info
Press icon (cham-
ber section) to
abort beep!
Press on the displayed
icon in chamber area to
switch of the „beep“
Press icon the get more details
Calibration validity
expired
Sensor should be calibra
-
ted
This function needs to be acti-
vated. Will be displayed in light
red color
Filter exchange
required
Chemical protection filter
must be replaced
This function needs to be acti-
vated. Will be displayed in light
red color
Stable signal re
-
minder activated!
Stable signal reminder has
been activated
Sensor nearly
exhausted!
Sensor is in bad condition
and cannot be calibrated
anymore soon
Contact your local representa
-
tive to order a spare sensor to
avoid instrument downtime due
to defective sensor