www.novasina.ch
32
33
ENGLISH
ENGLISH
selecting „System settings“-> „Maintenance“ -> „Verify barcode sanner“.
A respective entry in audit trial will be made as a proof. This option is only
available if „Batch name input“ is set to „Scanner“.
8.5 How to install the wireless barcode scanner
1. Preparation
Make sure, you have purchased a wireless barcode scanner set, P/N 26601698
from Novasina. Please note that just this set works with the LabMaster-aw neo,
any other wireless barcode scanner will neither work not are supported by No
-
vasina.
If you have ordered the wireless barcode scanner together with a LabMaster-aw
neo, Novasina took already care for the implementation and you don‘t have to
proceed with the tasks listed below.
To perform these tasks, you need the following tools:
•
Torx wrench size 20:
2. Installing the wireless barcode scanner board
•
Shut down LabMaster-aw neo and wait until instrument has switched off
completely
•
Remove power cord
•
Remove the two screws which fix the front module of the LabMaster-aw
neo by using the Torx wrench 20:
•
Thoroughly tear on the front module to loosen and to remove it:
•
Loosen the grey ribbon and the power plug (yellow color) from the front
module and remove the front module completely: