NovaScale Blade 2021 Series, Installation And User Manual, Page: 60 / 98

42
NovaScale Blade 2021 Installation and User’s Guide
9. Reinsert the NovaScale Blade Server into the bay in the NovaScale Blade Chassis unit.
10. Turn on the NovaScale Blade Server.
11. Start the NovaScale Blade Server Configuration/Setup Utility program and set configuration
parameters as needed (see “Using the Configuration/Setup Utility program” on page 49 for
information).
Completing the installation
To complete the installation, complete the following tasks. Instructions for each task are in the
following sections.
1. Reinstall the NovaScale Blade Server bezel assembly, if you removed it (see “Installing the
NovaScale Blade Server bezel assembly”).
2. Close the NovaScale Blade Server cover, unless you installed an expansion unit option (see
“Closing the NovaScale Blade Server cover” on page 44).
Statement 21:
xx
CAUTION:
Hazardous energy is present when the NovaScale Blade Server is connected to the power
source. Always replace the blade cover before installing the NovaScale Blade Server.
3. Reinstall the NovaScale Blade Server into the NovaScale Blade Chassis unit (see “Installing the
NovaScale Blade Server in the NovaScale Blade Chassis unit” on page 45).
4. Turn on the NovaScale Blade Server (see “Turning on the NovaScale Blade Server” on page 11).
5. For certain options, run the NovaScale Blade Server Configuration/Setup Utility program (see
“Updating your NovaScale Blade Server configuration” on page 46).
✏
NOTE
If you have just connected the power cords of your NovaScale Blade Chassis unit to
electrical outlets, you must wait until the power-on LED on the NovaScale Blade Server
flashes slowly before pressing the power-control button on a NovaScale Blade Server.