NovaScale Blade 2021 Series, Installation And User Manual, Page: 38 / 98

20
NovaScale Blade 2021 Installation and User’s Guide
• Handle the device carefully, holding it by its edges or its frame.
• Do not touch solder joints, pins, or exposed printed circuitry.
• Do not leave the device where others can handle and possibly damage it.
• While the device is still in its non-conductive package, touch it to an unpainted metal part of the
NovaScale Blade Chassis unit or any unpainted metal surface on any other grounded rack
component in the rack you are installing the device in for at least 2 seconds. This drains static
electricity from the package and from your body.
• Remove the device from its package and install it directly into the NovaScale Blade Server
without setting it down. If it is necessary to set the device down, place it back into its non-
conductive package. Do not place the device on your NovaScale Blade Server cover or on a
metal surface.
• Take additional care when handling devices during cold weather. Heating reduces indoor
humidity and increases static electricity.
Installing and removing the NovaScale Blade Server from
the NovaScale Blade Chassis unit
To install or remove a NovaScale Blade Server from the NovaScale Blade Chassis unit, see the
documentation that came with your unit for instructions.
Opening the NovaScale Blade Server cover
The following illustration shows how to open the cover on the NovaScale Blade Server.
Blade-cover
release
Blade-cover
release