7
Manual No. MF4-158-000 - September 2018
NOVA Lock-Up
™
Installation Manual
MOTOR COVER
LEFT SPRING COVER
RIGHT SPRING COVER
ROLLER TRACK
ASSEMBLY
CARRIAGE RETURN
SPRINGS (QTY 4)
CARRIAGE ASSEMBLY
SLOPE EXTENSION
ROLLER ASSEMBLY
(QTY 4)
LOWER SPRING BAR
OUTSIDE LIGHT
CONTROL BOX
PLACARD
OUTSIDE SIGN
INSIDE SIGN
FIGURE A—LOCK-UP COMPONENTS DESCRIPTION
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
A NOVA Lock-Up
™
vehicle restraint may be installed on
docks with or without levelers; consult NOVA for proper
application.
Follow the simple installation procedures below:
• Inspect NOVA Lock-Up
™
vehicle restraint parts.
• Install roller track.
• Install NOVA Lock-Up
™
vehicle restraint into roller
track.
• Install electrical components.
• Install safety & instruction signs.
• Test operation.
INSPECT NOVA LOCK-UP™ PARTS
Open packaging and inspect all parts and materials
—
see Figure A above. Immediately report any damage
or missing materials to factory. Review the component
assemblies to determine their correct locations.
DANGER
Post safety warnings and barricade work area,
at dock level and at ground level, to prevent
unauthorized use of the dock position.
NOTICE
A 4” thick bumper is required regardless of whether
or not there is a leveler. DO NOT install a NOVA
Lock-Up
™
vehicle restraint on docks without 4” thick
bumpers. For thicker bumpers consult factory.
Summary of Contents for Lock-Up
Page 2: ......
