14
NFS2-640/E Operations Manual —
P/N 52743:F1 06/16/2011
Use of the Controls
Programming Keypad
•
Turns off the
SIGNALS
SILENCED
LED
•
Sends a Manual Evacuate message to the History buffer and installed printers, CRT-2
terminals, and FDU-80 annunciators
2.3.5 Lamp Test
Use the
LAMP
TEST
key to test the control panel LEDs and the panel sounder. When pressed and
held, the control panel does the following:
•
Lights all control panel LEDs
•
Turns on the panel sounder
•
Lights all segments of the LCD display. When the
LAMP
TEST
key is held for longer than five
seconds, the LCD will display the Software Revisions.
2.4 Programming Keypad
The programming keypad includes:
•
Function keys:
DETECTOR
,
MODULE
,
OUTPUT
,
BATTERY
LEVELS
,
NEXT
SELECTION
,
PREVIOUS
SELECTION
,
RECALL
LAST
ENTRY
, and
INCREMENT
NUMBER
•
ENTER
key
•
Cursor movement keys:
ESC
/
LEFT
ARROW
key,
UP
key,
RIGHT
key,
DOWN
key
•
Alphabetic and numeric keys, with
LOWER
CASE
selection key
NOTE:
If Local Control is set to “0” (No Control) or “2” (Partial Control), the FACP will not
respond to
DRILL
.
