background image

ENGLISH

11

HOW TO OPERATE

1. 

First, find a stable surface near an electrical outlet before starting. Make sure the cord 

is away from any water source. It is acceptable to use an extension cord if needed.

2. 

Check to make sure the unit is in the OFF position, then plug into an electrical outlet.

3. 

Next, make sure the Extractor Head is in place and fully secured. 

CAUTION

: DO NOT add sugar or operate unit without Extractor Head in place.

4. 

Turn unit to ON position and Extractor Head will begin to spin. Allow unit to 

heat for at least 10 minutes before adding flossing sugar or hard candy. 

5. 

After allowing the unit to heat for 10 minutes, turn the unit OFF. 

6. 

Place 

no more than

 four pieces of hard candy 

or 

one scoop of flossing sugar into the 

Extractor Head. If using hard candies, make sure they are evenly placed on either side of the 

Extractor Head.  

CAUTION

: Do not overfill or use more than the directed amount of sugar in the Extractor 

Head. Overfilling may clog the unit or cause the sugar to fly from the Extractor Head. 

TIP

: For best results, we recommend crushing hard candies into smaller pieces before 

placing in the Extractor Head.

7. 

Switch the unit to the ON position.

8. 

When you see the cotton candy web begin, hold the cone horizontally over the Extractor 

Head to begin collecting the cotton candy. Rotate the cone with your fingers while you 

move the cone side to side above the bowl, making sure to collect all the cotton candy (see 

image below). 

CAUTION

: Make sure cotton candy webbing does not fall into the Heating Element as 

sugar is flammable. Turn the unit off and allow to cool before removing fallen sugars from 

the Heating Element. 

CAUTION

: The Extractor Head rotates at high speeds. Always keep jewelry, long hair, 

hands and face a safe distance away from the machine while in use to avoid possible injury.

9. 

Repeat the above steps to make more cotton candy. Make sure the Extractor Head is empty 

before adding another measure of hard candy or flossing sugar into the Extractor Head. 

By following these instructions, using your COTTON CANDY 

CART will be a fun and tasty experience!

Summary of Contents for CCM600









































Reviews: