Norwood Kwik-Till HSD1600, Operator'S Manual, Page: 98 / 152

5 - MAINTENANCE
5-8
DAILY
Check For Hydraulic Leaks
1. Unfold the machine into the Field Position .
(See “Kwik-
Till Folding & Unfolding” on page 4-11)
2. Lower the disks to the ground by retracting the Front
Wheel Cylinders
A
and Rear Roller Cylinders B .
(See Fig. # 5-5)
A
B
Fig. # 5-5 Lower Disks to the Ground
3. Relieve all the hydraulic pressure by placing the tractor
SCV levers to the FLOAT POSITION with engine
running for the Main Frame Lift & Wing Fold cylinders.
4. The machine should now be in the “Field Lowered Po-
sition” (See Fig. # 3-53) .
WARNING
Hydraulic oil leaking under pressure can penetrate the skin,
causing death or serious injury, or infection.
DO NOT use your hand to check for leaks. Use a piece of
cardboard or plywood.
5. Check all Hydraulic Hoses
A
, Adapters
B
, Cross-
overs C
,
Junctions,
D
, &
Hydraulic Cylinders
E
for
leaks. (See Fig. # 5-6) (See Fig. # 5-7) (See Fig. # 5-8)
A
B
B
Fig. # 5-6 Check For Hydraulic Leaks
C
E
C
B
Fig. # 5-7 Check For Hydraulic Leaks
D
Fig. # 5-8 Check For Hydraulic Leaks