Norwood Kwik-Till HSD1600, Operator'S Manual, Page: 44 / 152

3 - TRANSPORT OPERATIONS
3-2
Preparing The Tractor
Use Tractor Operator’s Manual
Fig. # 3-2 Use Tractor Operator’s Manual
Always refer to tractor Operator’s Manual for specific, detailed
information regarding operation of equipment. Use the tractor
Operator’s Manual for detailed information as procedures
vary by equipment.
Determine Tractor Requirements
Fig. # 3-3 Determine Tractor Requirements
For optimum performance, see “Tractor Engine Power
Requirements” in the Specifications section.
(See Fig. # 7-1
on page 7-1)
Install adapters if the tractor does not have ISO hydraulic
couplers. See your tractor dealer or qualified service provider.
Hydraulic Requirements
2900 psi (183 bar) (18 271 kPa) tractor hydraulic system with
ISO hydraulic couplers is required.
5 tractor control valves are preferred for operating the
Kwik-Till, 4 Minimum. 6 tractor control valves are required If
equipped with the rubber roller scrapers.