Norwood Kwik-Till HSD1600, Operator'S Manual, Page: 55 / 152

3 - TRANSPORT OPERATIONS
3-13
13. Raise the hitch jack until it fully retracts.
(See Fig. # 3-31)
Fig. # 3-31 Raise the Hitch Jack
14. Close the hydraulic hitch jack ball valve. (See Fig. # 3-32)
IMPORTANT
Close the hydraulic hitch jack ball valve to prevent accidental
operation of this circuit. Ensure ball valve handle remains
in closed position when not in use.
• Failure to close the ball valve during operation may cause
the hitch jack to extend causing damage to the hitch jack
and machine by accidental activation of the hitch jack SCV.
Close
Fig. # 3-32 Close the Ball Valve (Shown in the
“CLOSED”
Position)
NOTE
At this time, the hitch jack hydraulic hoses can be unhooked
and stowed if the tractor does not have enough SCV valves.
If your tractor does not have enough SCV valves proceed to
the next step, otherwise, skip the next step.
(See Fig. # 3-34)
15. Relieve pressure in the “Hitch Jack” circuit by placing
the tractor remote valve lever in the “FLOAT POSITION”
position temporarily with engine running. (See Fig.
# 3-33)
Fig. # 3-33 Tractor Remote Valve Levers
Fig. # 3-34 Hitch Jack Hoses Stowed In The Hydraulic
Hose Storage Slots