Norwood Kwik-Till HSD1600, Operator'S Manual, Page: 73 / 152

4 - WORKING OPERATIONS
4-9
• Install the Hitch Pin
B
, & secure with the Hair Pin
A
.
(See Fig. # 4-18)
Fig. # 4-18 Adjusting The Depth Stops Step # 3
A
B
D C
E
Manual Depth Control Procedure
1. Transport the Kwik-Till onto level ground.
2. Unfold the Kwik-Till to the
“Field Raised Position” .
(See
“Kwik-Till Folding & Unfolding” on page 4-11)
Fig. # 4-19 “Field Raised Position”
3. Make sure that the Rear Roller
A
and Front Wheel
Cylinders
B
are fully extended. When these cylinders
are extended, the disks will be completely off the ground.
(See Fig. # 4-20)
A B
Fig. # 4-20 “Field Raised Position”
4. Make the necessary adjustments with the “Depth Stops”
A good starting setting is to a depth of 2 in - 3 in (51 mm
- 76 mm) in spring and 3.5 in - 4.5 in (89 mm - 114 mm)
in fall. (See “Table: Depth Stop Adjustment” on page 4-7)
5. Fully retract the
Rear Roller
A
and
Front Wheel Cyl-
inders
B
. The cylinders will bottom out on the Depth
Stops
C
, and the disks will engage the soil at the set
depth.
(See Fig. # 4-21)
C
A C
B
Fig. # 4-21 Fully Retract the Rear Roller & Front Wheel
Cylinders