Norwood Kwik-Till HSD1600, Operator'S Manual, Page: 128 / 152

5 - MAINTENANCE
5-38
Fig. # 5-67 Prying Rubber Wheel Roller Into Position
Use Pry Bar
Against Here
Align Holes
Pry Bar
5. Align bolt hole and install (Qty. 1) 7/8”-9 X 3” Bolt
A
and (Qty. 1) 7/8-9 Nylock Nut.
(See Fig. # 5-68)
A
Fig. # 5-68 Align Bolt Hole and Install One Bolt
6. Use lifting device and lifting strap to rotate the rear at -
tachment into position.
(See Fig. # 5-69)
Fig. # 5-69 Rotate Rear Attachment Into Position
7. Install remaining bolts and nylock nuts.
Fig. # 5-70 Install Remaining Bolts & Nuts