Norwood Kwik-Till HSD1600, Operator'S Manual, Page: 84 / 152

4 - WORKING OPERATIONS
4-20
Front Of Hitch
Too Low
Lower
Hitch
Link
Fig. # 4-51 Kwik-Till Not Level - Lower Hitch Link (Upward
Angle)
3. The Kwik-Till hitch is equipped with a hitch link which can
be adjusted as needed to level the hitch. The Cat. IV hitch
link can be installed on the hitch tongue in four different
positions. (See Fig. # 4-45) The Cat. V hitch link can be
installed on the hitch tongue in three different positions.
NOTE
The Kwik-Till was leveled at the factory at “Position 4” for
Cat. IV Hitch links, and “Position 3” for Cat. V Hitch links.
POSITION # 4
POSITION # 2
POSITION # 1
POSITION # 3
Fig. # 4-52 Leveling The Hitch: Cat. IV Hitch Link Positions
POSITION # 3
POSITION # 2
POSITION # 1
Fig. # 4-53 Leveling The Hitch: Cat. V Hitch Link Positions
NOTE
NOTE: Rear Roller
and
Front Wheel
depth stops may
affect hitch leveling. Recheck
Rear Roller
and
Front Wheel
settings after changing hitch link positions.