Appendicies
91
SN
Standard Code
Name and Model
Installation Position
Qty
Oil Seal FB40×62×8D
Outer end at inside of long half shaft of rear
axle (up to 52 horsepowers)
2
Oil Seal FB40×62×8D
Intermediate section of Shaft I in the gear box
1
Oil Seal FB40×62×8D
Outer end at inside of long half shaft of rear
axle (55-60 horsepowers)
2
Oil Seal B65×90×12D
Driven bevel gear of second-stage reduction of
front drive
2
Oil Seal FB50×72×8D
Rear end of the driving bevel gear base of
front drive
1
2
GB/T3452.1
O-Rings 23.6×1.8G
Rear end of the auxiliary clutch shaft
in the gear box
2
O-Rings 15×2.65G
Differential lock operating shaft
1
Where the pressure oil pipe
meets the gear pump
1
O-Rings 11.2×2.65G
Power output control rod
1
O-Rings 115×3.55G
Outer end at inside
of long half shaft of rear axle
2
O-Rings 61.5×5.3G
Driving bevel gear of
second-stage reducton of front drive
2
O-Rings 19×2.65G
Where the oil-suction pipe
meets the gear pump
1
Where the pressure oil pipe meets the lifter
1
O-Rings 17×2.65G
Where the connecting plate of inlet oil pipe
meets the housing of lifter
1
O-Rings 20×2.65G
Locking shaft of lifter
3
Seal for the crank of brake
2
O-Rings 132×3.55G
Location for sealing the transfer case and the
rear-axle housing
1
O-Rings 25×2.65G
Seal of the fork shaft of transfer case
2
O-Rings 43.7×2.65G
Between the drive shaft
and sleeve of the transfer case
4
O-Rings 18×2.65G
Seal for the crank of brake
2
O-Rings 140×3.55G
Driven bevel gear of first-stage
reduction of front drive
2
O-Rings 34.5×3.55G
Driving bevel gear of first-stage
reduction of front drive
2
O-Rings 236×5.3G
Driven bevel gear of final-stage
reduction of front drive
2
O-Rings 58×3.55G
Where the front bracket of
front drive meets the housing
1
O-Rings 47.5×3.55G
Where the front supporting shaft of
front drive meets the base
1
O-Rings 90×2.65G
Where the rear base meets the housing
1
O-Rings 45×3.55G
Rear end of the rear base of front drive
1
O-Rings 17×2.65G
Oil inlet of the distributor
1
O-Rings 15×1.8G
Oil inlet of the distributor
1