Maintenance Instruction
62
IMPORTANT ISSUES
:
1.
In order to avoid staining the friction plate with oil, the drain plug below the flywheel cover should be pulled off
frequently to drain off the oil that may leak in the engine and the transmission box. If serious leakage is found,
promptly identify the reasons and deal with the problems. Use solvent to clean the friction plate, if necessary.
2.
In order to prevent excessive wear of the friction plate, the clutch should be maintained and adjusted regularly.
Do not disengage or engage the clutch arbitrarily during operation. When the clutch is released, quickly press
down the clutch pedal to the end. Do not operate it when it is in a half-released state to avoid damaging the clutch.
3.
Operating the tractor when the clutch is out of adjustment is strictly prohibited. This will accelerate the wear of
the clutch friction plate.
4.
When installing the clutch, if the release bearing (see Figure 4-1, item 5) is low on lubrication, worn, or damaged,
replace it.
5.
When using the clutch, releasing should be rapid and complete, and engaging should be soft and smooth, in order
to avoid damage to the clutch.
6.
When the tractor is running, never rest your foot on the clutch pedal, or use semi-engagement to reduce speed or
use sudden-engagement to jump the tractor. All of these can damage to the clutch.
7.
The surface of clutch friction discs should be kept clean of oil grime. If grime gets on the discs, it should be
removed with solvent. The friction discs can be reused after drying.