Operation Description
31
2.16.3 Application of the Hydraulic Output and Lock
Turn the adjustment valve (B) in a counterclockwise
direction until the valve is closed. This will also close
the adjustment valve on the inlet and outlet of the
oil cylinder. The male connector on the quick change
coupler is connected with the oil inlet of the
farm implement. The hydraulic output female
connector (A) is connected with the male connector on
the farm implement. Push the distributor control
handle to the lifting position to reach the appropriate
hydraulic output. Simple hydraulic output can only
control a single-action oil cylinder.
When using the hydraulic output, the farm implement
should be in the lift position, if the lower speed
adjustment valve (B) is closed and the oil in the tank
can not return. The farm implement should be locked
in the transport position and the adjustment valve can
act as the hydraulic lock.
WARNING
:
When transporting implements in the raised position over long distances, the hydraulic
lock should be used to lock the implements in place. This will prevent an accidental move of the distributor control
handle from making the farm implements drop suddenly and cause damage.
Figure 2-26 Hydraulic Output Controls
