background image

3                                                                                                                                

07069A 

 
 
 
 
 
 
 
 

OWNER’S MANUAL 

#

  

20200

 

ver. 

07069A

 

Page: 3             ENGLISH VERSION

 

SAVE THESE INSTRUCTIONS 

 

IMPORTANT SAFETY 
INSTRUCTIONS

 

W hen using your telephone equipment, basic 
safety precautions should  always be 
followed to reduce the risk of fire, electric 
shock, and injury to persons, including the 
following:   
1. 

Read and understand all instructions. 

2. 

Follow all warnings and instructions 
marked on the product. 

3. 

Unplug this product from the wall outlet 
before cleaning.  Do not use liquid 
cleaners or aerosol cleaners.  Use a 
damp cloth for cleaning. 

4. 

Do not use this product near water, for 
example, near a bathtub, wash bowl, 
kitchen sink, or laundry tub, in a wet 
basement or near a swimming pool. 

5. 

Do not place this product on an unstable 
cart, stand, or table.  The product may 
fall, causing serious damage to the 
product. 

6. 

Slots and openings in the cabinet and 
the back or bottom are provided for 
ventilation, to protect it from 
overheating.  These openings should 
never be blocked or covered.  The 
openings should never be blocked by 
placing the product on the bed, sofa, 
rug, or other similar surface.  This 
product should never be placed near or 
over a radiator or heat register.  This 
product should not be placed in a built -
in installation unless proper ventilation 
is provided. 

7. 

This product should be operated only 
from the type of power source indicated 
on the marking label.  If you are not 
sure of the type of power supply to your 
home, consult your dealer or local 
power company. 

8. 

Do not allow anything to rest on the 
power cord.  Do not locate this product 
where the cord will be abused by 
persons walking on it. 

9. 

Do not overload wall outlets and 
extension cords as this can result in the 
risk of fire or electric shock. 

10.  Never push objects of any kind into this 

product through cabinet slots as they 
may touch dangerous voltage points or 

short out parts that could result in a risk 
of fire or electric shock.  Never spill 
liquid of any kind on the product. 

11.  To reduce the risk of electric shock, do 

not disassemble this product, but take it 
to a qualified service contractor when 
some service or repair work is required.  
Opening or removing covers may 
expose you to dangerous voltages or 
other risks.  Incorrect reassembly can 
cause electric shock when the appliance 
is subsequently used. 

12.  Unplug this product from the wall outlet 

and refer servicing to qualified service 
personnel under the following 
conditions: 

A .  When the power supply cord or 

plug is damaged or frayed. 

B.  If liquid has been spilled into the 

product. 

C.  If the product has been exposed to 

rain or water.  

D.  If the product does not operate 

normally by following the 
operating instructions.  Adjust 
only those controls that are 
covered by the operating 
instructions.  Improper  
adjustments of other controls may 
result in damage and will often 
require extensive work by a 
qualified technician to restore the 
product to normal operation. 

E. 

If the product has been dropped or 
the cabinet has been damaged. 

F. 

If the product exhibits a 
distinctive change in performance. 

13. 

Avoid using a telephone (other than a 
cordless type) during an electrical 
storm.  There may be a remote risk of 
electric shock from lightning.

 

14. 

Do not use t he telephone to report a gas 
leak in the vicinity of the leak.

 

 

SAVE THESE INSTRUCTIONS 

 

     

      

MAINTENANCE

 

1. 

Use a damp cloth to clean the plastic 
cabinet.  A mild soap will help to 

remove grease or oil.  Never use 
polish, solvents, abrasives or strong 
detergents since these can damage 
the finish.

 

Summary of Contents for 20200













Reviews: