background image

07069A

 

                                                                                                                 

 6 

 
 
 
 
 
 
 
 

OWNER’S MANUAL 

#

  

20200

 

ver. 

07069A

 

Page: 6             ENGLISH VERSION

 

DESCRIPTIONS

 

Emergency Buttons

 - Allows you to 

one-touch dial for any of three (3) 
emergency numbers.

 

 
FLASH Button

 - Momentarily hangs up 

the phone to access custom calling 
features such as Call Waiting or Three-
Way Calling provided by your local 
phone company.    

 
Handset Retainer Tab -

 If you decide 

to have the unit placed  in the wall 
mount position, the handset retainer tab 
can be pulled out, turned around, and 
placed in the opposite direction so that it 
allows the handset to hang onto  the base 
unit

 
HANDSET VOLUME Control

 - Used 

to adjust the receiver volume. 
 

HOLD Button with LED Indicator

 -

When a caller is placed on hold, the Big 
Button Plus

 

20200 can be hung up 

without disconnecting the call.  The call 
can then be resumed later.  The HOLD 
LED indicator lights steadily whenever a 
caller is placed on hold. 
 

Hookswitch 

- A switch on the handset 

cradle of the base unit, which is used to 
hang up or get a dial tone. 

 
MEMORY Button

 Allows you to recall 

10 user programmed telephone numbers. 

 
PAUSE / REDIAL  Button

 - Allows 

you to insert a 4-second delay between 
dialed numbers in PABX systems or 
long distance services.

  

Redial is used to 

automatically dial the last phone number 
dialed up to 31 digits. 
 

PULSE / TONE Switch 

- Located on 

the right side of the base unit, this  
switch allows you to select the 
appropriate dialing service to either 
Pulse or Touch Tone dialing. 

RINGER TONE Control 

 - Used to 

adjust the ringer tone. 
 

RINGER VOLUME Control

 - Used to 

adjust the ringer volume.  

 
STORE Button

-  Used to store a phone 

number (up to 16 digits each) into one of 
the 10 available memory locations and 3 
emergency numbers.

 

 
TONE Button

- Provides touch tone 

outputs while using a pulse dial service 
to access automated banking services or 
any other service requiring touch tones.

 

 
Visual Ring Indicator 

- flashes to alert 

a person who has trouble hearing that 
the phone is ringing. 
 

      BATTERY 
      INSTALATION 

Your unit requires 2 “AA” batteries (not 
included).  alkaline batteries are 
recommended.  The battery 
compartment is located in the bottom of 
the base unit.  Carefully remove  the 
battery cover and follow the markings in 
the compartment as shown below:

Wall 
Mounting 
Slots 

Battery 
Compartment 

Summary of Contents for 20200













Reviews: