9
07069A
OWNER’S MANUAL
#
20200
ver.
07069A
Page: 9 ENGLISH VERSION
To Program the 3 Emergency
Numbers
1. Lift the handset and listen for a dial
tone.
2. Press and release STORE
BUTTON.
3. Enter the number to be stored. (The
telephone number will not dial out.)
4. Press and release the STORE
BUTTON.
5. Press the corresponding emergency
buttons for each of the emergency
numbers you wish to store:
(Fire) (Hospital) (Police)
6. Replace the handset to the base.
NOTE:
If the line power is lost for a
few hours, phone numbers stored in
MEMORY are not lost. The Big Button
Plus
20200 will retain the programmed
numbers.
IMPORTANT:
When programming
emergency numbers and/or making test
calls to emergency numbers:
1. Remain on the line and briefly
explain to the dispatcher the reason
for the call before hanging up.
2. Perform such activities during off-
peak hours such as early morning or
late evening.
To Dial an Emergency Number
1. Lift the handset and listen for a dial
tone.
2. Press the desired button. The
number stored in that button's
memory location will be dialed.
To program 10 frequently called phone
numbers
1. Pick up the handset and listen for a
dial tone.
2. Press and release the STORE
button.
3. Enter the phone number (up to 16
digits) you want to store into
memory (The telephone number
will not dial out).
4. Press and release the STORE
button.
5. Press a one-digit number ( 0 - 9) on
the keypad to store the phone
number into the desired memory
location.
6. Hang up the phone by returning the
handset to the handset cradle on the
base.
7. Pull the memory index card tab out
from under the unit and write the
name/company on the memory
index card relating to the phone
number just stored into memory.
8. To store more phone numbers or
modify existing numbers in
memory, repeat steps 1-7.
Recalling Stored Numbers from Memory
1. Pick up the handset and listen for a
dial tone.
2. Press the MEMORY button.
3. Press the corresponding memory
location key (0 - 9). The stored
telephone number will be dialed out
automatically.
GLOSSARY
Hearing Aid Compatible
– Allows
hearing aid devices to function properly
while using the handset.
Hold
-When a caller is placed on hold,
the Big Button Plus can be hung up
without disconnecting the call. The call
can then be resumed later.
Off-Hook
- The phone is off-hook
whenever the handset is not in its
cradle.. To get a dial tone, the phone
must be off-hook.
On-Hook
- The phone is on-hook
whenever the handset is in its cradle.
To hang up the phone, it must be in the
on-hook position.
