NorthStar EXPLORER 443S Installation And Operation Manual Download

Page: 19 / 32

Northstar

Explorer 443s/443sp

Installation and Operation Manual

Flashing Light and/or External Beeper

If a secondary alarm indicator is required, a
flashing light and/or external beeper can be
installed. These can be positioned anywhere
suitable on the boat. For installation advice see
section 5-4.

Enabling Alarms and Changing

Trigger Values

Press or to highlight an alarm, then press to
select it. To enable or disable an Alarm, press to
switch between ON and OFF.

To set the trigger value for an Alarm, press or
to increase or decrease the trigger value.

The alarm trigger value is retained even when the
alarm is disabled.

Select MAIN MENU - SETUP - UNITS to define the
units for depth, temperature, speed and fuel.

4-2 UNITS menu

Press or to
highlight an option.

DEPTH

Can be displayed
in units of feet (FT),
fathoms (FA), or
metres (M). Press
to select the required
depth units.

TEMPERATURE

Can be displayed in °F (Fahrenheit) or °C (Celsius).
Press to select the required temperature units.

SPEED

Can be displayed in knots (KN), miles per hour
(MPH), or kilometres per hour (KPH). Press to
select the required speed units.

Note:

Distance units will change automatically to

match the speed units.

Summary of Contents for EXPLORER 443S

































Search results

Summary of Contents for EXPLORER 443S

Reviews:

Related manuals for EXPLORER 443S

Brands by name

Popular brands

NorthStar EXPLORER 443S, Installation And Operation Manual

Search results

Summary of Contents for EXPLORER 443S

Reviews:

Related manuals for EXPLORER 443S

Brands by name

Popular brands