NorthStar EXPLORER 443S Installation And Operation Manual Download

Page: 23 / 32

Northstar

Explorer 443s/443sp

Installation and Operation Manual

Important:

This option resets all of the following settings
and resets them to the manufacturer’s default
settings.

Speed and distance are related. For example,
if knots are chosen as the speed units, then
distance is always measured in nautical miles.

To reset the fishfinder to the manufacturer’s
default settings, power off the fishfinder. Then
hold and power on while holding it.

The message “RESET TO FACTORY DEFAULTS?”
appears. Press to select YES or NO. Then press

or to reset the trip log and exit.

GENERAL

Auto Gain ..................................................... ON

Auto Range ................................................... ON

Manual Gain ...................................................... 5

Bottom Lock .................................................. ON

K ey Beep ........................................................ ON

Contrast ............................................................... 6

Backlighting .................................................... 10

4-9 Resetting to Factory Defaults

UNITS

Temperature ..................................................... °F

Depth ............................................................ Feet

Speed

..............................................................

ALARMS

Shallow Alarm ............................................. OFF

Shallow Alarm Value ................................. 10 ft

Deep Alarm .................................................. OFF

Deep Alarm Value ................................... 60 ft

Fish Alarm ..................................................... OFF

Temp. Change Alarm ............................... OFF

Temp. Change Alarm Value ............... 5.0 °F

Temp. Alarm ................................................. OFF

Temp. Alarm Value ................................. 80 °F

Low Battery Alarm ................................... OFF

Battery Alarm Value ...................... 11.5 Volts

FISH SYMBOL ....................................

INSTALL

Keel Offset ................................................. 0.0 ft

Fish Filter .................................................

Correct installation is critical to the performance
of the Explorer 443s/443sp. There are two
components to install, the display unit and the
transducer. It is vital to read the entire installation

5 Installation

section of this manual and the documentation
that comes with the transducer before
attempting installation.

5-1 What comes with the Explorer 443s/443sp?

Standard configuration

Explorer 443s/443sp display unit.

· Power

cable.

Mounting bracket (screws included).

Warranty registration card.

· This

manual.

Transducer (includes cable kit and screws).

Transducer Installation Manual.

· Screws.

Explorer 443sp
Power cable

Mounting
bracket

Transducer

Unit

Screws

Summary of Contents for EXPLORER 443S

































Search results

Summary of Contents for EXPLORER 443S

Reviews:

Related manuals for EXPLORER 443S

Brands by name

Popular brands

NorthStar EXPLORER 443S, Installation And Operation Manual

Search results

Summary of Contents for EXPLORER 443S

Reviews:

Related manuals for EXPLORER 443S

Brands by name

Popular brands