24
Northstar
Explorer 443s/443sp
Installation and Operation Manual
Optional transducers
·
Through hull Speed/Temperature transducer.
·
Through hull Depth transducer.
·
In hull Depth transducer.
Other options and accessories
·
Replacement paddle wheel.
·
Adapter cable for through hull transducer.
· Carry
bag.
·
Transducer extension cable.
· Sun
cover.
5-2 Options and Accessories
There are two mounting arrangements:
·
Flush
mounting
requires a solid panel
with access behind for wiring and
mounting screws.
·
Bracket mounting
requires a panel for
mounting the bracket. The bracket can
be rotated and tilted.
Select a position where the display head will be:
·
At least 4” (100 mm) away from the
compass.
·
At least 12” (300 mm) away from any radio
transmitter.
·
At least 4’ (1.2 m) away from any antenna.
·
Easy to read by the helmsman and crew
while underway.
·
Protected from physical damage during
rough sea passages.
·
Easy to access the 12 volt power source.
·
Convenient to route the transducer
cables.
Bracket mounting
1. Fix the mounting bracket onto the boat
using the three stainless steel screws. Do not
overtighten as the bracket may not rotate.
2. Push the display unit onto the mounting
bracket and tighten it firmly using the knob
on the mounting bracket.
3. Attach the cables.
5-3 Mounting the Explorer 443s/443sp Display Unit
Removing the Explorer 443s/443sp
The Explorer 443s/443sp can be removed after
each use for protection against the environment
or security reasons.
When removing the Explorer 443s/443sp ensure
that the plugs left in the boat are not exposed to
the elements. Push the attached dust covers over
the exposed ends of the plugs. Keep the display
unit in a dry clean place such as the optional
Northstar carry bag.
Flush mounting
1. Cut a hole in the bulkhead for the display
unit using the flush mount template.
2. Drill four holes for the mounting studs
using the flush mount template.
3. Screw the four studs into the brass inserts
in the back of the display unit.
4. Sit the display unit in place and fit the
washers and nuts to the studs.
Depth Repeater
Repeater for Depth, Speed, Water Temperature,
Battery Voltage (see section 5-5).
Please consult your Northstar dealer for more
information.
Summary of Contents for EXPLORER 443S
Page 1: ...www northstarnav com Explorer 443s 443sp Fishfinder Installation and Operation Manual ...
Page 30: ......
Page 31: ......
