T6-D-USER-RV-EN
Page 2-8
Description
© Park Air Systems Limited 2017
There are general purpose outputs on the FAC (facilities) connector:
2.2.6 AC and DC connectivity
There are both AC and DC inputs.
More information on all the connectors is shown in
There are a number of standalone and
antenna configurations. More information on antenna
configurations can be found in
.
2.3.1 Standalone configuration
RF switch control signal
Only enable the RF switch control setting on a radio that is connected directly to either another
Park Air T6 radio’s internal relay or a Park Air solid-state relay. The DC signal used for switching these
relays can cause other equipment to not function correctly and reduce system performance.
Rx tape output
Squelch relay output
Ready output
Supply output
DC input
and/or
AC input
*Uses the T6-RV internal solid-state RF relay.
Note:
External Park Air solid-state relays and/or splitters will be required for
some antenna configurations.
Standalone operation
Main/standby operation
Receive
Receive
Not used
Standby receive RF link*
Receive
antenna