T6-D-USER-RV-EN
Page 4-3
Front panel operation
© Park Air Systems Limited 2017
Settings are changed to suit system engineering and/or user requirements.
Note:
A web server is hosted in the radio. To set a radio setting via the web server, see
.
Settings
Description
Notes
Default
Loudspeaker/Headset volume
Selection of LOUDSPEAKER (shown) or HEADSET
volume.
Adjust the volume setting with the rotary/push switch
LOUDSPEAKER
ICAO channel
Example of ICAO channel
Option
minimum
ICAO channel preset
OFF or 1 to 100, set to OFF if frequency changed
manually
Presets are stored via the web server, see
5.3.4 How to store a preset on page 5-8
OFF
Channel spacing
Selection of 8.3 kHz or 25 kHz steps
25 kHz
Reference frequency
0.0 to 100.0 %
50.0 %
Receive audio
ON or OFF
ON
Receive
level
-114 to -60 dBm
-107 dBm
Squelch option
CARRIER or S/N or OVERRIDE
S/N
Radio inhibit
ON or OFF
OFF
Radio active or inactive status
ACTIVE or INACTIVE
ACTIVE
Radio active or inactive control
AUTO or MANUAL
AUTO
28V supply for RF switching
ON or OFF
Display only, this setting can only be changed remotely
OFF
Simultaneous Call Transmission
ON or OFF
Only available if option is installed
ON
IP address (LAN 1)
Example of IP address (LAN 1)
0.0.0.0
Subnet mask (LAN 1)
Example of
0.0.0.0
IP address (LAN 2)
Example of standby IP address (LAN 2)
0.0.0.0
Subnet mask (LAN 2)
Example of subnet mask (LAN 2)
0.0.0.0
IP address (LAN 3)
Example of standby IP address (LAN 3)
192.168.1.1
Subnet mask (LAN 3)
Example of subnet mask (LAN 3)
255.255.255.0
Default Gateway
The IP address of the default Ethernet switch
Example of Default Gateway address
0.0.0.0