Northern NVR16POE User Manual Download Page 66

Page: 66 / 186

NVR4POE / NVR8POE / NVR16POE Series NVR User Manual

5.5

Configuring VCA Triggered Recording

Purpose:

Perform the following steps to set the VCA alarm and trigger recording of related cameras.

Steps:

Enter VCA Alarm interface of Camera Management and select a camera you want to detect VCA alarm.

Menu> Camera> VCA

The selected camera must support the VCA function.

Figure 5. 16

VCA Alarm Setting Interface

Check the

Enable VCA Alarm

checkbox and click

Settings

button to set up its alarm response actions.

Figure 5. 17

VCA Alarm Handling

Select the channels which you want the motion detection event to trigger recording.

Click

Apply

to save the settings.

Edit the VCA Alarm Record Schedule. For the detailed information of schedule configuration, see

Chapter

Configuring Recording Schedule.

Summary of Contents for NVR16POE



























































































































































































Search results

Summary of Contents for NVR16POE

Reviews:

Brands by name

Popular brands

Northern NVR16POE, User Manual

Search results

Summary of Contents for NVR16POE

Reviews:

Brands by name

Popular brands