Northern Telecom 3X8, Owner'S Handbook Manual

Page: 204 / 240

M7310 User Card 199
About line buttons
systems can have different types of line buttons. Match the line
buttons on your telephone with the ones below for instructions on how to use
them.
Internal calls using Intercom buttons External calls using numbered Line
1. Pick up the receiver. buttons
2. If appears beside an Intercom
1. Pick up the receiver.
button, then dial.
O R
2. When appears beside a
numbered Line button, then dial.
Press an intercom button without
O R
, then dial.
Press a numbered Line button
without then dial.
Note: Internal numbers are supplied by your System Coordinator.
p i - - - - - ]
Internal calls using extension
buttons
1. Pick up the receiver.
2. When appears beside an
extension button, then dial.
External calls using extension
buttons
1. Pick up the receiver.
2. When appears beside the
extension button, then dial
(or your system’s external line
access code) and the number.
Holding Calls
1. Press
The beside the line on hold.
2 . Press the line button with the flashing return to the call.
Check the display for confirmation or additional information.
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
Dialing without
lifting the handset
PO842627 01
This button operates the telephone’s built-in microphone and speaker in place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
Making calls
1. Press
instead of picking up the receiver.
Switching between Handsfree and handset
Press and replace the handset to switch to Handsfree.
2 . Pick up the receiver to switch back.
Using Mute
1. Press to turn the microphone OFF.
2. Press again to turn the microphone ON.
1. line button without then dial your call.
2 . When answered, pick up the receiver, or press
3 . If the call is not answered, or the line is busy, press
DR5.1 Owner’s Handbook