background image

142   Line Redirection

Denied 

Displays while redirecting lines

You will see some of the following displays while programming

Line Redirection. The displays you see while canceling
redirection are listed after this chart. See the Dialing section for

displays that occur while entering telephone numbers.

You cannot perform line redirection on
an 

 Telephone.

You have tried to redirect calls, but
your telephone is not allowed access
to this feature. See the Allow redirect

section in the Programming chapter.

Enter the telephone number to which
you wish to redirect calls using one of
t h e   f o l l o w i n g   m e t h o d s :

l

Press an External 

 button.

.

Enter an external telephone

number of no more than 24 digits.
Then, press 

 or 

l

Press 

 

 the line

you have chosen as the outgoing

line is a private network line that

does not require you to dial digits.

I

You have tried to program redirection
while someone else is programming

redirection. Only one person can

program Line Redirection at a time.

Press 

q  

or the 

 button to begin

redirection. Press 

 or 

q  

to

cancel a previous redirection.

You have one external line on your
telephone, but you need a second line
to perform line redirection. Redirect

your external line using a line pool as

the outgoing line.

 

 Owner’s Handbook

PO84262701

Summary of Contents for 3X8

















































































































































































































































Reviews: