Northern Telecom 3X8, Owner'S Handbook Manual

Page: 201 / 240

196 M7208 User Card
About line buttons
systems can have different types of line buttons. Match the line
buttons on your telephone with the ones below for instructions on how to use
them.
Internal calls using Intercom E x t e r n a l c a l l s u s i n g n u m b e r e d l i n e
1. Pick up the receiver.
b u t t o n s
2. If appears beside an Intercom
Pick up the receiver.
button, then dial.
2. When appears beside a
O R
numbered Line button, then dial.
Press an Intercom button without
O R
then dial. Press a numbered Line button
without then dial.
Note: Internal numbers are supplied by your System Coordinator.
Internal calls using extension
b u t t o n s
1. Pick up the receiver.
2. When appears beside an
extension button, then dial.
External calls using extension
b u t t o n s
Pick up the receiver.
2. When appears beside the
extension button, dial
q
(or your system’s external line
access code) and the number.
H o l d i n g C a l l s
1. Press (Hold] . The beside the line on hold.
2 . Press the line button with the flashing return to the call.
Check the display for confirmation or additional information.
A u t o m a t i c h o l d
Calls are put on hold automatically when you switch from one line to another.
This button operates the telephone’s built-in microphone and speaker in place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
M a k i n g c a l l s
1. instead of picking up the receiver.
Switching between Handsfree and handset
1. and replace the handset to switch to Handsfree.
2 . Pick up the receiverto switch back.
U s i n g M u t e
1. to turn the microphone OFF.
2 . again to turn the microphone ON.
Dialing without
lifting the handset
1. Pressaline button without then dial your call.
2 . When answered, pick up the receiver, or press
3 . If the call is not answered, or the line is busy, press
.
DR5.1 Owner’s Handbook
PO84262701